Daily Maintenance Of Coin Operated Machines

Daily Maintenance Of Coin-Operated Machines

Hello dear all friend, hope all of you are happy, health and wealth, thanks for your patience to read my article. Today I am going to give you some tips about how to do daily maintenance for your equipements in your Game Zone/Game Center/Game Park/FEC. Please read below tips carefully, hope my article can do some help for you!

1. The operating voltage of the game machine should be within the range of 220V±10V or 110V±10V, too low will affect the visual effect, too high will easily damage the power box of the game machine, the scanning board, the transformer, and serious will lead to the damage of the computer board.

 2.The working environment of the game machine should be well ventilated and free from moisture.And regularly clean the dust inside the machine, air humidity is too low, will lead to parts rust, computer board electronic components local short circuit and burn out.

3. No mice should escape into the game room. Rat urine will lead to the scrap of electronic components.

4. The game machine should be placed smoothly and avoid shaking and vibration, in case the metal components or token fall to the quad components on the quad.

5.Game machine should avoid high pressure, strong magnetic interference, electronic ignition mechanism and other high pressure interference damage will cause computer board program out of control, serious damage to the computer board, the owner of the players should strengthen supervision.

6.The placement of computer board: in general, it is better to hang, should avoid contact with metal parts in the machine, such as screws, avoid using anti-static book film, anti-static foam isolation computer board, so as not to short-circuit burning board.

7. Periodically measure the voltage between the first and third pins of the blue plug of the console computer board, and ensure that the voltage is within the range of 4.8v ~ 5.3v.Voltage fluctuation caused by the change of potentiometer or component parameters should be measured regularly, adjust the +5V knob on the power box to correct.Too low will die board, too high will burn board.

8. Scanning board adjustment: to maintain good visual effects, the scanning board adjustment should be often adjusted.

9. Picture tube maintenance: too high brightness will shorten the life of the picture tube, the brightness should be adjusted to a moderate, damp will cause the picture tube high pressure fire and burn the scan board or computer board, picture tube color impure to Degaussing degauss.

Thanks for your watch, wish you have a booming business！